12
100mm x 100mm x 3mm Steel Post For Concreting
100mm x 100mm x 3mm Steel Post For Concreting

100mm x 100mm x 3mm Steel Post For Concreting

CODE: 100 - 1690 For Concreting
$152.45 Inc. GST
$0.00
$152.45
100mm x 100mm x 3mm Steel Post For Concreting

100mm x 100mm x 3mm Steel Post For Concreting

$0.00 $152.45
100mm x 100mm x 3mm Steel Post For Concreting
100mm x 100mm x 3mm Steel Post For Concreting

100mm x 100mm x 3mm Steel Post For Concreting

$0.00 $152.45
Length: 1690mm
Description
Description
x

Australian Made Steel Posts

Set in Concrete.
Set for Decades.

Your panels get the compliments. Your posts decide whether the line still runs true in twenty years. This is a 100 × 100 × 3mm galvanised Australian steel post, supplied with its colour-matched cap — ready to carry fencing, balustrades, privacy screens and gates, and hold every one of them exactly where you set it.

Structure

Straight Lines Start Here

A run is only ever as true as the posts behind it — fencing, balustrade, privacy screen or gate alike. Ours are cut from 100 × 100 × 3mm galvanised Australian steel and supplied in extended lengths for concreting in-ground, so the post is anchored well below the surface. Set properly, it holds the line through wind load, clay movement and decades of weather.

Complete Kit

Nothing Left to Chase Up

Every post arrives with a colour-matched snap-on post cap finished in the same powder coat as your panels — sealing the top of the section against water and finishing the line properly. No mismatched black cap on a Surfmist run, and nothing to chase up once the concrete is in.

Longevity

Galvanised First, Then Finished

Posts sit where water sits — at ground level, against concrete, in the weather. Ours start as galvanised steel, then receive our Four-Stage Bonded Powder Coat in your choice of 26 premium colours. Protection underneath, colour on top, and a finish that holds its lustre through Australian summers and coastal air alike.

Engineering Specifications

100 × 100 × 3mm Post for Concreting

Post section 100 × 100 × 3mm SHS
Material Galvanised Australian steel
Application Concreting in-ground for new fencing, balustrade, screen and gate runs
Available lengths 1690mm, 1800mm, 1970mm, 2100mm, 2250mm
Included Colour-coded snap-on post cap
Finish Four-Stage Bonded Powder Coat, 26 premium colours
Origin Designed, fabricated and finished in Tamworth, NSW

Choosing Your Post

Match the Post to the Panel

Post size is a structural decision, not a style one. Taller and wider panels carry more wind load, and gates carry more again — so both the section and the length change with the job. Here is how our post lengths line up with our standard panel heights.

Post length Suits panel height Post above panel Concreted below ground
1690mm 940mm 70mm 600mm
1970mm 1200mm 70mm 620mm
2250mm 1500mm 70mm 600mm

1800mm and 2100mm lengths are also stocked for gate posts, sloping sites and custom panel heights.

Mason & Dean post length guide for concreting showing 1690mm, 1970mm and 2250mm posts against 940mm, 1200mm and 1500mm high panels with 600mm concreted below ground
  • Setting into soil or new concrete? This post anchors below ground.
  • Working to a slab, deck, path or existing footing? Our bolt-down base plate post is the straightforward choice.
  • Finishing against a wall, pier or house? Our wall-mount post closes the run neatly.
  • Not certain? Send us your run length, panel heights and site photos and our product specialists will spec it with you.

Installation

Get the Footing Right and the Rest Follows

Dig a minimum 600mm deep hole and concrete the post in, bringing it plumb with a level and bracing it until the concrete goes off. In reactive soils, go to a minimum 900mm for added stability. Once cured, snap the colour-matched cap into place.

That's it. And if anything about your site is unusual — a slope, a tight boundary, an awkward corner — call us before you start. We'd rather spend ten minutes on the phone than have you buy twice.

Why Mason & Dean

The People Who Answer the Phone
Are the People Who Designed It

Mason & Dean is founder-led. The people who answer the phone are the ones who started the business and drew every profile in the range, so the advice you get is first-hand rather than read off a screen. Every post is made in our Tamworth workshop, colour-matched to the fence panels, gates and balustrades it supports, and backed by our 10-Year Warranty.

Posts rarely get chosen on their own. If you're still finalising the run, browse the matching fence panels, balustrades, privacy screens and gates that these posts are built to carry — all finished in the same 26 premium colours.

Need a hand sizing your posts? Call our product specialists on (02) 6762 5249 or send us your plans.

Related Products

Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45
Example product title
From $152.45 Inc. GST
$0.00
From $152.45

Recently Viewed Products